5 thoughts on “What are the advantages and disadvantages of the wall painting machine?”
Jan
The disadvantages of the wall painting machine are very high on the wall surface. If the injecting wall inkjet will be damaged, the wall surface will not be stained well. In the corner of the wall or corner, it can only be extended in the middle or 4 weeks. The place where the corner is not available, but he will be faster than the foundation we do, and the area that will be stepped on Essence
It is also often asked how we have painted the wall painting, but I have never seen it. I read a lot of information on Baidu and think that the four -point summary of 3DMAX_2008 This netizen may be very willing. Is, the technology is immature. The principle of the actual peace plane printing on the wall, but the angle is different. Everyone knows that the world’s mainstream printer manufacturers, such as Canon, Epson, and Hewlett -Packard, have not produced three -dimensional wall printing equipment, which actually proves that this technology is not mature, or it encounters problems that have not been solved. Because from a market perspective, wall printing has market demand. When the mainstream manufacturers have not developed and developed, some domestic small manufacturers and even workshops have developed such equipment, but the quality technology is far from reaching. I. The equipment is extremely bulky. The purpose of the wall printer is to help customers make money. Since it is printed on the wall, and the house and wall are impossible to move, then you can only move the printer. This is a question I didn’t expect in the manufacturer’s inspection.一个重达上百斤的设备，而且长宽高经过折叠后依然过于庞大，一般的家用轿车是没办法运输的，起码大一点的面包车，一般家庭的房间也不是很容易抬进去，普通楼房要是The customer is above the second floor and there is no elevator. You know that this kind of transportation is almost terrible, so there is no science to carry or use. It, the conditions for use are harsh. Due to immature technology, the wall painting machine is quite harsh on the environment and conditions of the work. For example, the wall should be very flat, the ground should be very flat, the length, width, and height have great limitations, and the temperature and humidity must meet the requirements. Outdoor operations are even more difficult, rain, wind, ground, etc. The same problem, the entire wall is broken. There is no other way except for the repair. The fourth, consumables and maintenance difficulties. Since most people are not machines and electronics, once there is a problem with the printer, because it is a problem with small manufacturers, they cannot come to the door to solve it. Either call for help or change some parts. These parts. It is very expensive to consuming, and it is almost proportional to the money you can make. The ideal is beautiful, reality is cruel, technology is the first productive forces, immature technology products, should stay in the laboratory, not in the market. Although there are no perfect products, do you dare to invest in things when you use it?
Advantages of machine: 1. Construction speed 2. Cost 3. Effects 4. Personnel 5, power off 1, construction speed 6 square meters per hour, if simply doing simple type of graphic speed will be faster. 2, cost: Absolutely lower than hand -drawn (you can consult) 3, effect: Although the feeling of hand -drawn is almost the same, the difference is not much. The only thing is that there is no soul feeling. The color color is automatically adjusted according to the color of the picture, and the effect is very regular. This is not comparable to hand -drawn. 4, the personnel are equipped with two people, and there is no need to have an art foundation. As long as you need a computer, if you can’t, you just need to understand how to adjust the running software. (Why do you need 2 people? One person is not you ca n’t do it, but the effect of the device for the device will be faster and more efficient.) 5, even if the power is disconnected, it can also be constructed, external power supply, and drive the motor. No 220V electricity is needed, the battery is sufficient! Power off, connect to the battery, you don’t need to hit the picture again. As long as the computer has electricity, you can continue to run and have a lot of advantages. I will not give it one by one here. Let ’s talk about the disadvantages make disadvantages: 1. Make diagram relative to rigid 2. There are requirements for construction walls. 3. Benefits should be repaired. 4. Construction leave white edge The soul -painted soul feels that the picture made is just relatively rigid, just like the picture printed by the printer, there is no problem in the beauty. It’s just that the high -handed high requirements are weaker. 2. The construction wall requires that the flatness of the wall cannot have an error of 2 cm. Although the machine has a curved sensation (the upper and lower probe induction). If you are not fast, you will stab the wall, but you do n’t have to worry about the spray head. Considering this, there are protection around the spray head. Besides, if a wall with a 2 cm difference is not done yet, it is generally necessary to deal with the wall surface when construction is generally done. 3, the machine will be broken, it will be maintained, but you do n’t have to worry. There is a one -year warranty period. In this year, if the non -human cause is damaged, it can be maintained for free. rn4、施工留白：例如角对角，达到机器可施工最宽值得话，白边部分距离：最顶10公分最左：10公分最底：10公分最右：40公分，这点For your reference (some pictures will not have white edges, you can consult and understand) If you are outdoors, you will not worry about this problem. Pure hands, I feel that helping you can help you to adopt it!
Advantages of wall painting machines: The wall surface is wide, the construction efficiency is high and fast, and the effect is high -definition. No matter what pictures, as long as you have pictures, you can print it. Low printing costs and high profit margins. And saving labor costs, easy to operate alone. The threshold is low, no artistic skills are required. The disadvantages of the machine: Do not paint the wall like artificial painting, you need to leave white up and down.
The disadvantages of the wall painting machine are very high on the wall surface. If the injecting wall inkjet will be damaged, the wall surface will not be stained well. In the corner of the wall or corner, it can only be extended in the middle or 4 weeks. The place where the corner is not available, but he will be faster than the foundation we do, and the area that will be stepped on Essence
It is also often asked how we have painted the wall painting, but I have never seen it. I read a lot of information on Baidu and think that the four -point summary of 3DMAX_2008 This netizen may be very willing.
Is, the technology is immature.
The principle of the actual peace plane printing on the wall, but the angle is different. Everyone knows that the world’s mainstream printer manufacturers, such as Canon, Epson, and Hewlett -Packard, have not produced three -dimensional wall printing equipment, which actually proves that this technology is not mature, or it encounters problems that have not been solved. Because from a market perspective, wall printing has market demand. When the mainstream manufacturers have not developed and developed, some domestic small manufacturers and even workshops have developed such equipment, but the quality technology is far from reaching.
I. The equipment is extremely bulky.
The purpose of the wall printer is to help customers make money. Since it is printed on the wall, and the house and wall are impossible to move, then you can only move the printer. This is a question I didn’t expect in the manufacturer’s inspection.一个重达上百斤的设备，而且长宽高经过折叠后依然过于庞大，一般的家用轿车是没办法运输的，起码大一点的面包车，一般家庭的房间也不是很容易抬进去，普通楼房要是The customer is above the second floor and there is no elevator. You know that this kind of transportation is almost terrible, so there is no science to carry or use.
It, the conditions for use are harsh.
Due to immature technology, the wall painting machine is quite harsh on the environment and conditions of the work. For example, the wall should be very flat, the ground should be very flat, the length, width, and height have great limitations, and the temperature and humidity must meet the requirements. Outdoor operations are even more difficult, rain, wind, ground, etc. The same problem, the entire wall is broken. There is no other way except for the repair.
The fourth, consumables and maintenance difficulties.
Since most people are not machines and electronics, once there is a problem with the printer, because it is a problem with small manufacturers, they cannot come to the door to solve it. Either call for help or change some parts. These parts. It is very expensive to consuming, and it is almost proportional to the money you can make.
The ideal is beautiful, reality is cruel, technology is the first productive forces, immature technology products, should stay in the laboratory, not in the market. Although there are no perfect products, do you dare to invest in things when you use it?
Advantages of machine: 1. Construction speed 2. Cost 3. Effects 4. Personnel 5, power off
1, construction speed 6 square meters per hour, if simply doing simple type of graphic speed will be faster.
2, cost: Absolutely lower than hand -drawn (you can consult)
3, effect: Although the feeling of hand -drawn is almost the same, the difference is not much. The only thing is that there is no soul feeling. The color color is automatically adjusted according to the color of the picture, and the effect is very regular. This is not comparable to hand -drawn.
4, the personnel are equipped with two people, and there is no need to have an art foundation. As long as you need a computer, if you can’t, you just need to understand how to adjust the running software. (Why do you need 2 people? One person is not you ca n’t do it, but the effect of the device for the device will be faster and more efficient.)
5, even if the power is disconnected, it can also be constructed, external power supply, and drive the motor. No 220V electricity is needed, the battery is sufficient! Power off, connect to the battery, you don’t need to hit the picture again. As long as the computer has electricity, you can continue to run and have a lot of advantages. I will not give it one by one here. Let ’s talk about the disadvantages
make disadvantages: 1. Make diagram relative to rigid 2. There are requirements for construction walls. 3. Benefits should be repaired. 4. Construction leave white edge The soul -painted soul feels that the picture made is just relatively rigid, just like the picture printed by the printer, there is no problem in the beauty. It’s just that the high -handed high requirements are weaker.
2. The construction wall requires that the flatness of the wall cannot have an error of 2 cm. Although the machine has a curved sensation (the upper and lower probe induction). If you are not fast, you will stab the wall, but you do n’t have to worry about the spray head. Considering this, there are protection around the spray head. Besides, if a wall with a 2 cm difference is not done yet, it is generally necessary to deal with the wall surface when construction is generally done.
3, the machine will be broken, it will be maintained, but you do n’t have to worry. There is a one -year warranty period. In this year, if the non -human cause is damaged, it can be maintained for free. rn4、施工留白：例如角对角，达到机器可施工最宽值得话，白边部分距离：最顶10公分最左：10公分最底：10公分最右：40公分，这点For your reference (some pictures will not have white edges, you can consult and understand) If you are outdoors, you will not worry about this problem. Pure hands, I feel that helping you can help you to adopt it!
The wall painting machine is rarely bought on the market now, and the market has already been saturated.
Advantages of wall painting machines: The wall surface is wide, the construction efficiency is high and fast, and the effect is high -definition. No matter what pictures, as long as you have pictures, you can print it. Low printing costs and high profit margins. And saving labor costs, easy to operate alone. The threshold is low, no artistic skills are required.
The disadvantages of the machine: Do not paint the wall like artificial painting, you need to leave white up and down.